Steps for switching to {{_getActiveMode(modeValue)}} mode
1
Turn off the power supply
2
Remove the J10 and J11 shunts from SPI position (pins
1-2)
3
Install the J10 and J11 shunts to UART position (pins
2-3)
4
Power on the device
1
Turn off the power supply
2
Remove the J10 and J11 shunts from UART position (pins
2-3)
3
Install the J10 and J11 shunts to SPI position (pins
1-2)
4
Power on the device
Note: Please replug the USB2ANY after powering on the
device.