BLE5-Stack

Table of contents

• Overview
  • Supported Bluetooth LE Stack Features
  • Bluetooth Low Energy Protocol Stack Basics
• Generic Access Profile (GAP)
  • GAP Roles
  • GAP Constraints
  • GAP Advertiser
  • GAP Peripheral
  • GAP Scanner
  • GAP Initiator
  • GAP Central
  • GAP Connection State
• Generic Attribute Profile (GATT)
  • GATT Characteristics and Attributes
  • GATT Client Abstraction
  • GATT Server Abstraction
  • GATT Services and Profile
  • GATT Security
  • Using the GATT Layer Directly
  • Maximum Transmission Unit (MTU)
• GAP GATT Service (GGS)
  • Using the GGS
• Generic Attribute Profile Service (GATT Service)
  • Using the GATT Service
• GATTServApp Module
  • Building up the Attribute Table
  • Implementing Profiles in Attributes Table
  • Add Service Function
  • Register Application Callback Function
  • Read and Write Callback Functions
  • Read Request from Client
  • Write Request from Client
  • Get and Set Functions
  • Queued Writes
  • Allocating Memory for GATT Procedures
  • Registering to Receive Additional GATT Events in the Application
  • Delaying an ATT Read Request
• GAP Bond Manager and LE Secure Connections
  • Security Modes in a Bluetooth LE Connection
  • Selection of Pairing Method
  • Using GAPBondMgr
  • GAPBondMgr Examples for Different Pairing Methods
  • GAPBondMgr Examples for Manipulating Bonding
  • GAPBondMgr and SNV
  • GAPBondMgr and Service Change Indication
  • Pairing and Encryption without GAPBondMgr
• Privacy
  • Privacy and Address Types
  • Resolving Private Addresses
  • Using Privacy in BLE5-Stack
  • Host Address Resolution in BLE5-Stack
• Logical Link Control and Adaptation Layer Protocol (L2CAP)
  • General L2CAP Terminology
  • L2CAP Modes of Operation
  • L2CAP Channels
  • L2CAP Frame types
  • Fragmentation/Recombination
  • Segmentation/Reassembly
  • Configuring L2CAP
  • L2CAP MTU
  • Controller to Host Flow Control
  • Connection Oriented Channels Example
• Link Layer (LL)
  • Link Layer Primary Task
  • Link Layer Secondary Task
  • Link Layer Control Packet Buffer
  • Link Layer Buffers
  • LE Data Length Extension (DLE)
  • 32 Connections Design
  • TX Power Backoff Table for CC13x2P Devices
• Channel Selection Algorithm #2
  • Summary
  • Default Configuration
  • Disabling CSA #2
• Host Controller Interface (HCI)
  • Using HCI and HCI Vendor-Specific Commands in the Application
  • Standard LE HCI Commands and Events
  • HCI Vendor-Specific Commands
• Physical Layer (PHY)
  • Introduction
  • LE 2M PHY
  • LE Coded PHY
  • PHY Comparison
  • Advertising PHY
  • Scanning PHY
  • Initiating PHY
  • Changing PHY
  • PHY Limitations
• Stack Configurations
  • Configuring Bluetooth Low Energy Protocol Stack Features
  • Run-Time Bluetooth Low Energy Protocol Stack Configuration