TI 15.4-Stack

• Overview
• Architecture Choices
• Data-Rate and PHY
• Application Overview
  • Application Architecture
  • Start-Up in main()
  • Indirect Call Framework
    • ICall Protocol Stack Service
    • ICall Primitive Service
      • Messaging and Thread Synchronization
      • Heap Allocation and Management
    • ICALL Initialization and Registration
    • ICALL Thread Synchronization
    • System Stack
    • Example ICALL Usage
  • General Application Architecture
    • Application Initialization Function
    • Event Processing in the Task Function
      • Events Signaled Through the Internal Event Variable
    • Callbacks
  • Non-Volatile Memory
  • TI-RTOS Drivers
    • Adding a Driver
• Example Applications
  • Collector Example Application
    • Running the Application
  • Sensor Example Application
    • Running the Application
    • Micro BLE (uBLE)
  • OAD Projects
    • Running Over-the-Air-Download Example Applications
    • BLE OAD
  • FH Conformance Certification Application Example
  • Configuration Parameters
  • Coprocessor Example Application
  • Linux Example Applications
    • Linux Collector and Gateway Application
    • Linux Serial Bootloader Application
• Beacon Enabled Mode
  • Introduction
  • Network Operations
    • Network Start-Up
    • Network Association
    • Data Exchange
    • Maintaining a Connection for End Nodes
    • Network Disassociation
  • Stack Configuration Knobs
    • Attribute Configuration
    • Configuration Constants
• Non-Beacon Mode
  • Introduction
  • Network Operations
    • Network Start-Up
    • Network Join
    • Data Exchange
    • Maintaining a Connection for End Nodes
    • Disassociating
  • Stack Configuration Knobs
    • Attribute Configuration
    • Configuration Constants
• Frequency-Hopping Mode
  • Introduction
    • Network Operations
    • Network Start-Up
    • Device Start-Up
    • Network Join
      • Phase 1: Exchange of Channel-Hopping Sequence Information Through Asynchronous Messages
      • Phase 2: Proprietary Association Procedure to Inform Coordinator of the Network Join (This is an Optional Step)
    • Data Exchange
      • Unicast Data Exchange
      • Broadcast Frame Exchange
      • Asynchronous Frame Exchange
      • Sleep Mode Operation
      • Maintaining a Connection for End Nodes
      • Disassociating
    • Stack Configuration Knobs
      • Parameters Controlling the Unicast Channel-Hopping Sequence of the Node
      • Parameters Controlling the Broadcast Channel-Hopping Sequence
      • Changing Broadcast Sequence Values in the Middle of Network Operation
      • Parameters to Control Frequency of the Operation of Hopping Mode
      • Parameters to Control Neighbor Table Size
      • Parameters to Enable Application Generate and Process Asynchronous Frames
• Configuring Stack
  • Mode Configuration
  • CC1190 PA/LNA Support
  • CC1352P1 and CC1352P2 Support
  • Bluetooth Low Energy Advertiser
    • Configuring uBLE Stack
  • Security
• Packet Sniffer
• Creating Custom Applications
  • Adding a Board File
  • Configuring Parameters for Custom Hardware
  • Creating Additional Tasks
  • Configuring TI 15.4-MAC Stack