SimpleLink™ CC13XX/CC26XX SDK Z-Stack User's Guide
6.20.00
Introduction to the SimpleLink CC13xx/CC26xx SDK
Introduction
CC13xx and CC26xx Overview
TI-RTOS (RTOS Kernel) Overview
SimpleLink CC13xx/CC26xx SDK Overview
Developing Zigbee Applications
Application Overview
Green Power Application Overview
Z-Stack Overview
Flash
Memory Map
Running the Example Applications
Network Configurations
Power Configuration
Zigbee Network Processor (ZNP) Interface
MT Interface
Product Certification
FCC Certification Considerations
Custom Hardware
Zigbee Over-The-Air Firmware Upgrade
Wi-Fi Coexistence
Debugging
Memory overview
Packet Sniffer
System Configuration (SysConfig)
EnergyTrace User Guide
Migration Guide
References
Terms and Acronyms
SimpleLink™ CC13XX/CC26XX SDK Z-Stack User's Guide
»
Developing Zigbee Applications
Developing Zigbee Applications
¶
Application Overview
Application Architecture
OSALPort Framework
Customizing Application Builder Functionality
Common User Interface
Green Power Application Overview
Green Power Device
General Application Architecture
Setting Up the Network with GPD and GPS
Adding Green Power Proxy Capabilities to Routing Sample Applications
Adding Green Power Sink Capabilities to Routing Sample Applications
Z-Stack Overview
Introduction
Zigbee
Addressing
Binding
Routing
ZDO Message Requests
Portable Devices
End-to-End Acknowledgements
Miscellaneous
Security
Clusters, Commands, and Attributes
Commissioning
Network Manager
Green Power
Inter-PAN Transmission
ZMAC LQI Adjustment
Flash
Non-Volatile Storage Architecture
Non-Volatile Memory Items
Memory Map
CC13x2x1 or CC26x2x1 Memory Map
CC13x2x7 or CC26x2x7 Memory Map
CC13x1x3 or CC26x1x3 Memory Map
Memory Map Variables
TI-RTOS ROM Jump Table
Determining Project Build Size
Running the Example Applications
Network Configurations
Changing Stack Parameters
Power Configuration
Overview
TX Power Configuration
Additional Optimizations
Example Application Power Test Definitions
Zigbee Network Processor (ZNP) Interface
Introduction
Acronyms
Physical Interface
ZNP Software Command Interface
MT Interface
Introduction
Adding MT to a SimpleLink CC13xx/CC26xx SDK Zigbee 3.0 Project
Product Certification
Zigbee Product Certification Overview
Frequently Asked Questions
FCC Certification Considerations
Power Limiting Table Adjustment